Install A Co2 Cartridge In An Hk Usp Co2 Non Blow Back

The HK USP CO2 Non Blow Back pistol is definitely an air-soft-type pistol for sport shooting of BB pellets. It's made by Umarex like a licensed replica of the actual gun produced by German weapons firm Heckler and Koch. This sport pistol depends on co2 tubes to propel the BB pellets. Setting up a co2 cartridge, referred to as a "capsule," within this pistol is a straightforward procedure. A special wrench is incorporated for setting up the cartridge, and it ought to be installed together with new BB pellets.

Instructions

1. Make certain the gun is empty of pellets hold it to ensure that the security catch faces you and also points right.

2. Press playboy latch underneath the trigger set up pull playboy from the handle by tugging around the fringe of playboy in the thumb indentation at its base. Stand playboy on the flat working surface to ensure that it faces as when you drawn it from the handle.

3. Pull lower the spring-loaded lever in the left from the magazine. Fill the big slanted hole over the lever with as many as 16 models of 6 mm air-soft BB pellets.

4. Put a small amount of non-oil airgun oil around the tip from the co2 capsule. Get playboy to ensure that the very best is moved from you and also place the capsule within the hole at the bottom of playboy.

5. Make use of the special wrench to tighten the cartridge piercing screw that's situated at the bottom of playboy.

6. Put the magazine within the grip handle, pressing upward before the latch clicks.