Refill Paintball Co2 Tanks

Paintball markers require CO2 or compressed air to fireplace paintballs.


Paintball markers require some type of propellant to fireplace paintballs. CO2 and compressed air are typical propellants and bulk cylinders are usually less expensive than compressed air which will make them a typical option for gamers that desire to fill their tanks in your own home. Re-filling a CO2 tank is really a quick process that may be completed in the area with only a couple of items.


Instructions


1. Verify the bulk CO2 tank is marked "dip tube" or "siphon tube" before ongoing. Paintball tanks require partial liquid fills and dip tube bulk tanks go ahead and take liquid gathered at the end from the tank through the dip tube or siphon.


2. Verify the paintball CO2 cylinder continues to be "hydro examined" in the last 3 to 5 years based on the service sticker situated somewhere around the cylinder. Hydro tests are an expert service that tests the serviceability from the CO2 tank helping avoid injuries triggered by destabilized tanks rupturing pressurized.


3. Place the O-Ring seal in to the valve set up around the CO2 refill package that attaches towards the bulk CO2 tank and screw the refill package to the CO2 tank. Tighten the package having a crescent wrench to make sure a great seal.


4. Set all valves towards the OFF position before proceeding. Including the valve for that primary CO2 tank, the cut-off valve and also the bleed valves around the refill package, and also the valve around the nozzle connected to the fill hose.


5. Attach the paintball CO2 cylinder towards the refill package through the nozzle in the finish from the fill hose.


6. Hang the CO2 cylinder in the hanging scale and open the bleed valve to get rid of any CO2 inside. Close the bleed valve when the cylinder is empty.


7. Alter the scale's models of measure to oz . and zero the scale once any excess CO2 continues to be cleared and also the tank is totally empty.


8. Fill the cylinder by opening the primary CO2 tank valve and so the cut-off valve around the refill package. The cylinder should fill to roughly half capacity prior to the flattened demands between your primary CO2 tank and also the paintball cylinder detain the procedure.


9. Close the primary CO2 tank valve and also the cut-off valve, then open the bleed valve to get rid of the tank once more. Close the bleed valve when the cylinder continues to be completely cleared. This can drastically lessen the temperature from the cylinder, that is essential to acquire a full capacity fill.


10. Open the primary CO2 tank and also the cut-off valve to fill the paintball CO2 cylinder. Fill the cylinder to 1 ounce underneath the printed capacity from the cylinder for safety reasons. Fill a twelve ounce tank with eleven oz . of CO2 for instance.


11. Close all valves and unscrew the filled CO2 cylinder in the fill hose.







Tags: primary tank, bleed valve, cut-off valve, paintball cylinder, fill hose

What's on Your Mind...