Paint A Stainless Steel Sniper Rifle Barrel

Unload the rifle prior to doing other things.

By trying to fresh paint over a stainless-steel sniper rifle barrel, losing will quickly occur. Stainless is really a infamously poor candidate for adhesion and can reject any kind of colored finish unless of course it's specifically given an acidic base. If you would like the barrel's new finish to last greater than a couple of days, give a gal metal-etching connecting base. Go ahead and take proper safeguards whenever using a gun, or you might finish up suffering injuries or dying.

Instructions

1. Unload the rifle forum and appearance to make sure that the chamber isn't housing yet another round of ammunition.

2. Clean the stainless even when the rifle barrel seems to become clean unseen oils out of your fingers will hinder adhesion. Clean the barrel with a degreaser and rinse it, using wet rags. Point the barrel downward while you fix it to avoid moisture from flooding the inside from the barrel. Allow the rifle forum dry for 2 hrs.

3. Cover the servings of the stainless gun you'd would rather leave unpainted, using hiding paper and tape. Put the rifle forum on the canvas drop cloth.

4. Coat the stainless barrel with little else but a gal metal-etching spray primer. Clever stainless has a tendency to promote a sagging finish. Ensure a clear, crisp, attractive finish by preserve eight inches between your rifle forum barrel and spray nozzle. Allow the rifle forum dry for 3 hrs.

5. Fresh paint the stainless barrel while you primed it. Apply an oil enamel. Don't handle the rifle forum not less than three hrs.