Make An Air Compressor For Diving

Diving compressors are most secure if bolted to some dive boat's deck.

Air compressors are utilized in diving to permit a wide open system of breathing for any diver at certain depths. The benefit to this kind of system is it offers the opportunity to dive as lengthy as necessary without returning towards the surface for additional air. Scalping strategies are simple to construct from materials available at any do it yourself or dive store. Using a compressor for diving needs a devoted individual to have their eyes around the system to look at for operating issues. The machine ought to be examined included or dry land just before ever trying a real dive.

Instructions

1. Acquire a suitable air compressor for that project. The tank should have a computerized pressure switch, a minimum of single-horsepower engine along with a medium-sized air tank. Since the majority of the air is going to be pressed directly lower towards the diver, the tank does not have to be excessively large. It really needs some type of storage just in case of the sudden lack of pressure in the engine.

2. Begin a reliable quality energy supply. This is actually the tricky part, as small motorboats don't also have the energy output essential for managing a compressor. Make certain that there's whether devoted generator to be used included to operate the pump, or perhaps a energy inverter to attract energy in the boat's engines without leading to a burnout.

3. Connect an air conditioning filter and water separator towards the compressor. This helps keep the quality of air good coming with the compressor while making certain that no water supports in to the system and results in damage somewhere. Some compressors include built-in hvac filters, and semirigid flexible plastic tubing can be useful for water drainage. Make use of a socket set or adjustable wrench to help make the connections.

4. Use brass, quick-connect couplings for that air tubing. Brass tubing is a straightforward-to-connect choice in couplings, also it stands up better inside a marine atmosphere than gal or aluminum fixtures. Make sure to from time to time take apart, rinse with water, and use a lubricating spray to any or all couplings to safeguard corrosion damage.

5. Bolt the compressor towards the boat deck to prevent any movement from the mechanism throughout operation. This will make the system a lesser danger for other pursuits around the boat deck, and in addition it causes it to be simpler to service and clean. Use sturdy, 3-inch steel bolts along with a socket set for connecting the compressor.

6. Buy a diving set that have a tether line for any compressed air system with a minimum of 40 ft. Most large dive shops or diving supply stores will either have this or have the ability to special order it. Also purchase any valves and fittings essential for use using the equipment and compressor. Connect the tether line towards the compressor and tighten it entirely having a wrench.