Fix A 1991 Colt Airsoft Gun

The 1911 Colt Air-soft gun is really a non-lethal replica of the classic weapon from the early twentieth century. The spring that pushes the 1911's ejection fishing rod can extend with use and start to neglect to engage correctly. Fix the 1911 by getting rid of the spring and blending it. No special expertise is required because the 1911 is made for disassembly on the regular agenda for maintenance and cleaning.


Instructions


1. Press the magazine clip release right from the trigger guard, that is around the 1911's right side. Pull playboy clip from the handle.


2. Push the very best blowback plate toward the hammer. Continue pushing home plate until it clicks in place.


3. Take out around the retaining pin around the right side from the 1911, just beneath home plate and right from the barrel. Release the retaining plate all around the pin together with your fingers. Pull the retaining pin and also the retaining plate from the 1911.


4. Grip the finish from the top blowback plate that's nearest towards the barrel. Pull home plate left and off the top 1911.


5. Take away the spring from the compartment towards the top of the 1911. Convey a soft towel up for grabs. Stand the spring around the towel. Placed on your projects mitts.


6. Hold the foot of the spring from the towel using the left hands. Press the palm from the right hands against the top spring.


7. Push lower around the spring. Continue pushing until over 1 / 2 of the spring is compressed. Contain the spring within the compressed position not less than two minutes--although 3 or 4 minutes are more suitable.


8. Release the spring once the time expires. Remove your projects mitts. Return the spring towards the compartment towards the top of the 1911. Return the very best blowback plate to the top 1911. Push home plate completely towards the hammer until it clicks in place.


9. Place the retaining pin into the hole along the side of the 1911. Switch the retaining plate all around the pin. Push the pin completely in.


10. Press the trigger to produce the very best blowback plate. Reinsert playboy clip in to the handle from the 1911.







Tags: blowback plate, magazine clip, retaining plate, your projects mitts, clicks into, clicks in place, Colt Air-soft

What's on Your Mind...