Design A Gun Rack

Design and make an affordable gun rack that's ideal for installation in the spare room or hobby room. Customize the design having a lumber of your liking to construct a gun rack appropriate for the living room or sports room.

Instructions

1. Cut the PVC pipe into twelve 9-inch tall pieces.

2. Make certain the fir-by-6-inch board's finishes are level by cutting them if required. Cut the board into five pieces: three 32 inches lengthy and 2 24 inches lengthy.

3. Mount the 2 1-1/2 x 2 x 9-1/2-inch boards to the foot of the 24-inch 1 x 6-inch boards to ensure that one finish from the 9-1/2-inch board is square and flush using the 1 x 6 x 24-inch board, along with the 24-inch board within the vertical position. Do that for sides individuals gun rack to produce the primary rectangular frame.

4. Place among the 1 x 6 x 32-inch boards on the top of these two 1-1/2 x 2 x 9-1/2-inch pieces and square up all boards therefore the sides are.

5. Utilizing a 1-7/8-inch hole saw cut holes within the two remaining 1 x 6 x 32-inch boards on 2-1/2-inch centers.

6. Place this board directly on the top from the bottom board you simply mounted to the bottom of the gun rack. This produces a shallow hole for that bottom finish from the PVC pipe pieces for the rack.

7. While using last 1 x 6 x 32-inch board cut an identical group of holes on 2-1/2-inch centers. Mount this board towards the upright boards while using wood screws 4 inches up in the bottom base.

8. Place the PVC pipes in to the upper holes from the rack, slide lower and put within the counter sunk holes at the base from the rack.

9. Use a bead of silicone caulking round the bottom and top holes to secure the pipes into position.

10. Stain the gun rack utilizing a finish of your liking.