Change My Guerrilla Air Tank To A Low Pressure Tank

Guerrilla tanks are members of a paintball gun system.

Guerrilla air tanks are small air tanks accustomed to charge paintball guns. They're typically set at ruthless when bought. Many people prefer lower pressure, plus some paintball guns require less pressure. You are able to lower pressure inside your Guerrilla tank by altering the shims on air nozzle. It removes easily having a hex wrench. You could have your Guerrilla tank switched to low pressure in under fifteen minutes.

Instructions

1. Release all pressure around the tank if it's billed. The top tank works just like a tire valve. Press lower around the small pin in the center from the valve using the finish of the hex wrench. The environment will start to hiss and escape. Contain the valve lower before the tank is empty.

2. Stand the environment tank on a worktable. Utilizing a 4 mm hex wrench, release and take away two setscrews that contain the nozzle towards the finish from the tank. Those are the couple of screws there which will fit the wrench.

3. Unscrew the nozzle clockwise and lift them back the tank. Set the tank aside.

4. Contain the nozzle with one hands. There's a little piston being released the finish from the nozzle. Wiggle and pull onto it until together with your other hands before the piston arrives from the nozzle. It'll expose a spring plus some bushings around the finish from the piston. Don't allow the spring disappear and obtain lost.

5. Pull the spring and also the shims from the piston. Open the package. Remove the bushings. Put them around the piston individually. Put the spring back on.

6. Screw the nozzle back around the tank. Screw the 2 setscrews into the nozzle. The tank is able to charge.