Test Paintball Tanks

A paintball tank which has arrived at its expiration date can cause a danger if utilized in a paintball gun. You'll have a paintball tank which has arrived at its expiration date examined to make sure whether or not this can nonetheless be used or should be thrown away. You won't have the ability to do that yourself, and can must see an expert licensed source that hydro-tests the paintball tank. The licensed personnel will have the ability to see whether the paintball tank is protected to pressurize and employ with equipment that's unavailable to everyone.

Instructions

1. Take note of the amount listed along the side of the paintball tank beneath the "REE (rejection elastic expansion) text.

2. Watch because the licensed personnel places the paintball tank right into a tank holder using the cylinder pipe facing up. The licensed personnel will press a change to engage the gripping strap to carry the paintball tank in position

3. Take notice of the licensed personnel unscrew the cylinder pipe in the paintball tank and inspects it aesthetically for damage. The paintball tank will be launched in the tank holder and looked over for visual damage.

4. The foot of an adapter plate is screwed onto the top paintball tank.

5. The top adapter plate has become screwed into among the mister nozzles at the base from the lid from the tank testing chamber. The lid is decreased in to the tank testing chamber, which is stuffed with water. The clamps from the lid are actually attached to the tank testing chamber to secure the 2 together.

6. The securing lever from the scale tube used particularly for paintball tanks that's along the side of the tank testing chamber has become launched therefore the scale reads zero. 5 minutes receive to guarantee the scale reads zero.

7. The tank testing chamber has become pressurized by turning a knob around the user interface for that tank testing chamber.

8. Wait for a pressure scale to achieve the boundaries of pressurization. Note the amount around the scale tube.

9. Compare the amount around the scale tube with this from the number listed along the side of the paintball tank beneath the "REE (rejection elastic expansion) text. When the number around the scale tube is slightly less or perhaps using the "REE" number, the paintball tank’s capability to expand with pressurized gas in it's not impaired.

10. Inspect the amount of the size tube for any minute to make sure there's no alternation in pressure. Release the lever following a minute has transpired to produce pressure. Inspect the amount of the size tube to ascertain if the paintball tank returns to zero.

11. Discard the paintball tank after getting rid of it in the tank testing chamber when the scale didn't go back to zero and there's no "REE" number around the paintball tank.

12. Screw the cylinder pipe back to the paintball tank, pressurize it and then utilize it otherwise.