Make Paintball Guns

Make Paintball Guns

Paintball is among the most enjoyable leisure sports and combat games performed today. 1000's of individuals suit up striking the forest and special parks to experience paintball wars with colorful balls of fresh paint. The most crucial bit of paintball gear you'll need may be the paintball gun. These guns could be pricey, but you may make your personal.

Instructions

1. Make use of a handsaw to chop single-feet bit of PVC pipe. Using 100 grit sandpaper, rub the cut finish to get rid of any burrs. This is your paintball clip or barrel.

2. Glue a PVC pipe connector to 1 finish from the barrel you simply cut.

3. Connect the threaded finish of the clip or barrel in to the gas valve which will control the ventilation to your paintball gun. Screw a PVC pipe connector to the other finish from the gas valve.

4. Cut a bit of PVC pipe between 4 and 5 inches lengthy using the handsaw. Glue a lady cap onto one finish from the PVC pipe piece.

5. Attach the feminine finish cap towards the gas valve. You might want to purchase some pipe sealer and put it on these pipe pieces to make certain you aren't getting any air leaks.

6. Fill your gun filled with air. Probably the most air you will need to place in your paintball gun is all about 40 pounds of air.