Disassemble A New Colt Agent

Take apart a brand new Colt Agent

The Colt New Representative is basically a little-frame form of the venerable old Colt 1911--similar in design towards the Colt Defender--designed particularly for carry-hidden reasons. The Brand New Agent doesn't have sights onto it, meaning it is not easy to shoot precisely at longer ranges--it implies that you can easily tap into a pocket or handbag because there's absolutely nothing to snag on fabric because it is being drawn. Taking apart the Colt New Representative is a comparatively simple exercise and it is basically just like a Colt Defender.

Instructions

1. Eject playboy in the New Agent's handle and pull the slide back several occasions to eject any bullets that may have been loaded in to the firing chamber. Clearing and unloading your weapon ought to always be the first thing when you're focusing on a gun.

2. Withdraw the slide before the small notch around the left-hands side from the gun slide is arranged using the slide-stop lever--also around the left-hands side from the gun.

3. Press the slide-stop lever up in to the take-lower notch, then push the slide-stop lever pin from to left with the primary body from the gun. This can remove the slide stop lever and pop it from the gun.

4. Slide the slide completely forward and from the New Agent's frame. Set the frame off aside.

5. Push the recoil spring forward slightly, then lift up and from the slide.

6. Push the latch at the rear of the barrel forward, then slide the barrel straight the front from the slide.