Use Encore Rifle Barrels

Thompson/Center is really a subsidiary of Cruz & Wesson and creates the Encore gun line. The Encore system utilizes an interchangeable platform that provides over 90 barrel choices. These barrels provide a unique break hinge design, and every barrel could be set up in the factory to suit a rifle pistol, muzzleloader or shotgun. To be able to make use of the Encore, you must understand install the barrel and open it up. All Encore barrels fit fit specific weapon frames, but they are set up in a universal manner.

Instructions

1. Use a thin coat of gun oil to any or all metal parts.

2. Take away the forend (forward grip) in the barrel you are going to use the gun frame.

3. Place the barrel carry lower in to the frame. Align the barrel carry hole and frame hole. Place the provided hinge pin.

4. Close the barrel to the frame, hinging the experience shut.

5. Squeeze forend beneath the barrel. Fall into line the screw holes and screw within the two provided forend screws.

6. Put the hammer within the "At Relaxation" position. Contain the weapon through the pistol grip. Pull-up and back around the trigger guard spur. The barrel will unlock and switch downward.