Set The Lpr On Etek Paintball Guns

A gas-powered Etek paintball gun (Also known as paintball marker) can differ the rate from the fired paintball capsule. To alter the rate, adjust the reduced pressure regulator (LPR) while shooting a marker. The process affects the strain from the springs within the gun and doesn't require using any tools. The Etek's warranty isn't voided using this method.

Instructions

1. Placed on the protective eyeglasses like a provision. Bring your Etek paintball gun to a shooting range. Stand in the firing line across from the target.

2. Bring the gun up to and including firing position. Release the LPR knob at the end front from the gun by rotating it counterclockwise. Continue rotating the knob until it arrives from the gun.

3. Reinsert the knob in to the gun. Rotate it three turns clockwise.

4. Place the end of the Phillips jeweler's screwdriver in to the screw in the heart of the knob. Rotate the screw a complete turn clockwise.

5. Fire the gun. Note the effectiveness of the outcome where the paintball capsule strikes the prospective. Rotate the screw one-quarter turn clockwise and fire again. Continue doing this before you are pleased with the rate from the gun.

6. Fire the gun another seven occasions at half-second times. Put the gun aside since it's been modified. Take away the protective eyeglasses.