Finish Wood Grips

" old world " grips have hands applied finishes.

Present day hands grips are production oriented. Meaning they have a high-coat of lacquer or varnish. There's an easy method. Traditional grips were hands-applied with linseed oil. Hands-applied oil finishes are much better for beauty and protection oil permeates deep in to the wood where it solidifies within the pores. Hands applied oil finishes take more time, but they're well worth the time. Grips are often small , can adapt well to hands applied finishing.

Instructions

1. Sand the grip lower to reveal wood. Make use of your fingers and a bit of 100 grit sandpaper. Repeat sanding check your grip with 400 grit sandpaper, after which with fine steel made of woll before the grip includes a velvet feel.

2. Pour a small quantity of linseed oil in your fingers. Smear the oil in to the grip. Pour more oil and smear more in to the grip. Continue adding oil and covering it in before the grip looks wet. Wait 24 hrs.

3. Rub the grip with your fingers and palm. Rub it intensely until it's slightly warm. Pour more oil in your finger and rub check your grip. Cover check your grip completely until it appears wet. Wait 24 hrs.

4. Rub check your grip again until it's warm. Increase the oil. Wait 1 week.

5. Rub, polish and add oil towards the grip every single day for just one week. Next, rub, polish and oil check your grip lower at least one time per week for the following month. Next, repeat at least one time every six several weeks or even more. Leave check your grip out where one can reach it easily. Turn it into a habit to get check your grip and rub it within the nights -- the greater frequently the greater.